Description
Optimal Efficiency 92% with Digital Control
The high power conversion efficiency allows quiet and cooling running of the charger and can provide continuous full load operation at 40°C ambient temperature.
Designed to cover old and new types of car alternators The SBC-6101 are designed to address to the issues of wide swing of output voltages from the smart alternator, braking regenerative EURO 5/6 vehicles in fully charging the house battery. They are also suitable for use with distant house battery. The charger Booster provides fast safe charging profiles for lead based and Lithium FePO4 batteries.
Multistage Charging This charger is designed for fast accurate and safe recharge of your deep cycle house battery banks. The (digital control) smart multistage charging enables the charger to be connected permanently to your battery banks without the worry of over charging or drying out the electrolyte.
A 3 Stage Bulk, Absorption & Float charging profile with maximum constant charging current at the Bulk Stage and a Constant Voltage with decreasing charging at the Absorption Stage and a reduced voltage Float Charge for maintenance when battery is full.
Two charge control methods:
| Ignition Control: | Charger starts charging only when ignition is on and stops charging when Ignition is off. This is the recommended control as it is safer and allows for large input voltage range. |
| Input Voltage Control: | This is for non-intelligent or older type alternators with sufficient high & uniform voltage. Charging is cut off easily due to high threshold voltage to protect the starting battery. |
Features
- 200Watt power conversion efficiency >92%.
- 2 types of operation control to choose for specific situation.
- Air convection.
- Protections:
- Self recoverable Input under Voltage protection.
- Self recoverable Input over Voltage protection.
- Self recoverable Output over Voltage protection.
- Self recoverable Overcurrent protection.
- Self recoverable Charger over temperature protection.
